How do you apply a RapidMount Q20?

Posted by: on Jul 31, 2018

Before mounting ensure the surface is free of oils and dirt. Gently clean mounting surface with rubbing alcohol and cloth. Let dry. Do not use household cleaners. Be sure to follow compatible surface mounting guidelines listed in the FAQs for best results.

Peel backing off RapidStrip (RS). Attach RS to Q20 device. Peel backing off the other side of RS. Press device, with RS, firmly on mounting surface for 30 seconds. Let cure for 3 minutes. Press device firmly against the wall again before mounting cameras or other accessories to the Q20 device. Hold articulating arm firmly with one hand while tightening device with the other hand to avoid any rotation pressure on the Q20 device.

To remove from surface, place thumb and forefinger in the grips on the RapidMount Q20. Pull slowly from one side of the device, with applied pulling pressure, to release the seal on the strip. Once removed from the surface, peel off RS. When ready to use again, repeat the process with new RapidStrip.